What are the daily maintenance and upkeep procedures for plastic pelletizing equipment?
Time：
2017-11-25
1. Maintain proper oil levels in all lubricated parts of the machine and replenish oil as specified to ensure adequate lubrication. 2. Conduct regular maintenance on both the main and auxiliary equipment, keeping them clean, tidy, and free of debris. 3. Perform routine inspections of equipment, instruments, and other critical components; if any abnormalities are detected, stop the machine immediately for troubleshooting to extend its service life. 4. After starting up, continuously ensure that the hopper base and screw are cooled by circulating cold water. 5. When shutting down and dismantling the head, if the shutdown period is prolonged, apply anti‑rust oil to all components mounted on the head. 6. During the first year of operation, change the oil quarterly; thereafter, change it every six months (for the gearbox and other related components).
1. Maintain the oil levels in all lubricated parts of the machine and lubricate according to the prescribed schedule to ensure proper equipment lubrication.
2. Regular maintenance shall be performed on both the main and auxiliary equipment, and they shall be kept clean and tidy, free of debris.
3. Conduct regular routine inspections of equipment, instruments, and other operational components; if any abnormalities are detected, immediately shut down the equipment for maintenance to ensure its service life.
4. After starting the machine, always ensure that the hopper base and the screw are continuously cooled with chilled water.
5. When shutting down and dismantling the machine head, if the shutdown period is prolonged, apply anti-rust oil to all components mounted on the machine head.
6. When the new machine is first put into operation, change the oil once per quarter during the first year; thereafter, change the oil every six months (for the gearbox and other components). For all other lubrication points, maintain adequate oil levels at all times. Regularly clean the oil filters and suction pipes, and periodically remove oil sludge and sediment from the bottom of the oil tank.
7. Inspect the gearbox’s gears, bearings, and oil seals once a year (the maintenance interval may be appropriately extended if no abnormalities are detected);
8. When parking the machine for an extended period, implement measures to prevent rust and contamination.
Related news
Shuangda
Hebei Shuangda Rubber Machinery Co., Ltd.
Tel：400-0319-386
Landline：+86-319-6017632
Email：shuangdaxiangsu@126.com
Official website：www.shuangdajx.com
Addr：Liyuantun Industrial Zone, Weixian County, Xingtai City, Hebei Province
Copyright © 2022 Hebei Shuangda Rubber Machinery Co., Ltd.