Short 90 rubber extruder

The extruder screw is made of nitriding steel (38CrMoALA), machined on a CNC screw milling machine, and undergoes surface nitriding treatment in a nitriding furnace, achieving a hardness exceeding HRC62. The inner wall also receives nitriding treatment, resulting in a hardness greater than HRC66. The exhaust screw features a German Telester design, providing excellent venting performance, superior extrusion stability, and the ability to handle large quantities of material.

Key words:

Classification:

Rubber, rubber and plastic extrusion line

Business Hotline:

400-0319-386

Related products

Feedback

Short 90 rubber extruder

1. Product characteristics

The equipment is mainly used for the extrusion of automobile rubber hose, reinforced rubber hose and special-shaped rubber hose; The extrusion of single rubber seal, double compound seal, three compound seal and four compound seal for automobile and the extrusion of small and medium-sized industrial rubber hose; Extrusion of textile roller and leather ring.

2. Advantages and Characteristics:

Cold feeding rubber seal extruder: It is a kind of equipment that uses cold rubber to produce. The feeding way of the equipment is generally strong refrigeration feeding. The cold - fed rubber extruder is characterized by high production efficiency and stable production. Generally, extruder is used to produce seals, rubber tubes and other products that can be produced by extrusion process. Extruder is used for extruding tread, inner tube, rubber hose and rubber type strip rubber machinery.

The extruder screw is made of nitriding steel (38CrMoALA), machined on a CNC screw milling machine, and undergoes surface nitriding treatment in a nitriding furnace, achieving a hardness exceeding HRC62. The inner wall is also subjected to nitriding treatment, resulting in a hardness greater than HRC66. The exhaust screw features a German Telester design, providing excellent venting performance, stable extrusion, and high output capacity.

The feeding device is composed of a feeding machine barrel and a feeding roll. The feeding roller is driven by gears, and the structure is Italian type. No rubber leakage, reduce the possibility of rubber material into the bearing

The extruder adopts DC driver control, with the main motor overcurrent, overload, phase loss, undervoltage, loss of magnetism, low speed start protection functions;

Extruder adopts hard gear reducer, low noise, low vibration.