News

Trade news

Company news

FAQ

How to Maintain a Composite Pipe Production Line

Time：

2018-07-26

As a common type of plastic machinery, composite pipe production lines require regular maintenance and servicing, which must be carried out in strict accordance with established procedures. Maintenance should also adhere to the relevant safety and technical performance requirements for each piece of equipment, ensuring smooth operation and safeguarding both the equipment and personnel. The following outlines key maintenance practices for composite pipe production lines: 1. The maintenance of critical components such as the screw and barrel must follow the instructions provided in the equipment manual. 2. Regular inspections are required to detect leaks in the piping system and verify the tightness of all fasteners. 3. The cooler should be immersed and cleaned with a carbon tetrachloride solution every 5 to 10 months of operation.

As a common type of plastic-processing machinery, composite pipe production lines require regular maintenance and servicing, which must be carried out in strict accordance with established procedures. Moreover, maintenance should be performed in compliance with the relevant safety and technical specifications for each piece of equipment, thereby ensuring smooth operation and effectively safeguarding both the equipment and personnel.

Below is an introduction to the maintenance of composite pipe production lines.

1. Maintenance of critical components such as the screw and barrel must be performed in accordance with the instructions provided in the manual.

2. Regular inspections are required to check for leaks in the plastic pipe equipment and pipelines, as well as the tightness of fasteners.

3. The cooler should be soaked and cleaned with a carbon tetrachloride solution every 5 to 10 months of operation.

4. Regularly inspect the grounding connections, as well as the insulation of electrical components and the condition of aging wires.

5. Regularly inspect the machine’s safety devices to ensure they are functioning properly; in particular, after changing molds, verify that the mechanical interlocks have been adjusted accordingly.

6. Regularly verify the reliability of the lubrication system, lubricate moving parts as specified, and check that the oil levels in both the lubrication pump reservoir and the machine base reservoir are adequate.

7. Based on operating time, perform regular maintenance and repairs on the composite pipe equipment a number of times, focusing on cleaning, lubrication, adjustment, disassembly, and inspection.

8. Regularly inspect the oil filter screen or packing, cleaning and replacing them as needed, and frequently monitor the oil for contamination or degradation. When hydraulic oil turns dark brown and develops a foul odor, this indicates oxidation and deterioration. Replace the hydraulic oil promptly. If small black particles or transparent specks are present in the oil, it suggests the presence of contaminants or metal filings; filter the oil or change it.