Silicone Strip Equipment Operation and Maintenance
Time：
2017-09-30
1. Before use, the hardened‑tooth‑surface reducer must be filled with lubricant (refer to the oil dipstick): use gear oil in summer and No. 45 mechanical oil in winter. Regular oil changes will help extend the reducer’s service life.
2. Before starting the silicone strip extruder, check the power supply to prevent motor damage or burnout caused by poor electrical contact.
3. Before using the vacuum head, tighten all screws and fasteners; after shutdown, thoroughly clean out any adhesive. Once the machine is started, adjust the core to ensure proper alignment.
Before using the barrel and screw, check whether any iron particles have entered the silicone rubber to prevent damage to the components. Prior to shutdown, ensure that all material has been completely extruded from the barrel and screw to avoid cured material affecting subsequent use.
5(1) Clean the transmission oil tank, inspect the gear meshing for wear, adjust the belt tension to an appropriate level, and lubricate the wheels with wheel grease at regular intervals.
(2) Clean the material cylinder, screw, and inner cavity of any residual cured material; otherwise, glue leakage may occur. Ensure that the water in the machine’s water jacket remains unobstructed and clean.
(3) Regularly inspect the sulfurization chamber to assess wear and looseness of bearings and rotating shafts, and determine whether any components need to be replaced. Also check the heating and sealing systems; replace or add heating elements as necessary, and clean the air ducts to ensure smooth operation.
Related news
Shuangda
Hebei Shuangda Rubber Machinery Co., Ltd.
Tel：400-0319-386
Landline：+86-319-6017632
Email：shuangdaxiangsu@126.com
Official website：www.shuangdajx.com
Addr：Liyuantun Industrial Zone, Weixian County, Xingtai City, Hebei Province
Copyright © 2022 Hebei Shuangda Rubber Machinery Co., Ltd.