Maintenance of PVC Plastic Rubber strip Extruder
Time：
2017-12-09
In order to ensure the producing process of PVC Plastic Rubber strip Extruder and long service-life, the following work should be done in the process of production operation
1. Boot after can not run empty for a long time, so as not to scratch or cylinder screw.
2.Make sure the raw materials is clean, do not let the foreign metal matters or other matters fall into the barrel, damage the screw and the cylinder.
3.There must be have enough materials in the barrel. In cannot guarantee hopper when feeding, should immediately stop, the extruder can't working free in the absence of material.
4.When the extruder working for a long time, should check the lubricating oil and the heating situation. Always pay attention to the operation of PVC plastic strip extruder. If there have any unnormal situation, should stop the machine immediately and troubleshooting.
5.If the power supply suddenly stopped, when the power is recovered, must heat every parts of the barrel in setting temperature. After a period of constant temperature, the machine can restart. If the temperature is not enough, the material will be added to the material, the material of the barrel will be damaged to the extruder.
6.PVC plastic strip extruder use after a period of time, can have the gear reducer lubrication under the grinding of iron filings or other impurities, so to clean the gear change reducer lubricating oil at the same time. Should change the lubricating oil regularly. Every year, check the gear, bearing, and various parts of the gearbox, and change the wear and tear in time.
Related news
Shuangda
Hebei Shuangda Rubber Machinery Co., Ltd.
Tel：400-0319-386
Landline：+86-319-6017632
Email：shuangdaxiangsu@126.com
Official website：www.shuangdajx.com
Addr：Liyuantun Industrial Zone, Weixian County, Xingtai City, Hebei Province
Copyright © 2022 Hebei Shuangda Rubber Machinery Co., Ltd.