Standardized Platform Production Line

Vacuum Table Material Stainless Steel Table Dimensions 3000 mm × 8000 mm Movement Method Manual (up, down, left, right, forward, backward) Movement Range Less than 120 mm Water Nozzles Included 16 Air Nozzles Included 16 Forming Speed Synchronized with the extruded profile Vacuum Pump Power 2.2 kW Control Box Controls the vacuum pump start-up (low-voltage circuit) Power Supply Voltage 380 V, 50/60 Hz Applications The forming platform is designed and manufactured by Hebei Shuangda Rubber & Plastic Machinery Co., Ltd. It is specifically used in plastic product manufacturing to minimize bending and distortion, thereby improving the yield of qualified products. The platform ensures proper cooling and shaping of profiles, offering simple operation and stable performance. Working Principle Made of stainless steel, the forming platform features longitudinal, transverse, and height-adjustable supports, allowing easy alignment with the mold exit. This machine consists of an independent full-vacuum system combined with a spray section, delivering rapid cooling and excellent shaping results. Usage and Maintenance Before use, inspect the nozzles for blockages and thoroughly clean any foreign matter from the platform as well as the filter mesh inside the bypass-type filter. Apply lubricant to threaded components and bearings. Ensure that electrical components remain free from water splashes. In freezing weather, shut down the equipment and drain all water from the water tank, pumps, and vacuum pump to prevent freezing and potential damage to the pump and piping. Check the rails for foreign objects and verify that no personnel or unrelated items are present within the working area. After completing all preparatory steps, energize the machine for trial operation, adjusting speed and tension according to actual requirements.

Key words:

Classification:

Product Showcase

Business Hotline:

400-0319-386

Related products

Feedback

Standardized Platform Production Line

Vacuum table material	Stainless steel
Countertop dimensions	3000mm*8000mm
Mode of movement	Manual (up, down, left, right, forward, backward)
Movement range	Range < 120 mm
With a water spout	16 pieces
With a straw	16 pieces
Setting speed	Synchronized with extruded profiles
Vacuum pump power	2.2kw
Distribution box	Control vacuum pump start-up (low-voltage circuit)
Power supply voltage	380V, 50/60Hz

Purpose

The shaping platform is designed and manufactured by Hebei Shuangda Rubber & Plastics Machinery Co., Ltd. It is specifically intended for use in the production of plastic products, helping to minimize bending and warping, thereby increasing the yield of qualified finished goods. The platform ensures effective cooling and stabilization of profiles, while offering simple operation and stable performance.

Working principle

The shaping platform is constructed from stainless steel and features longitudinally, transversely, and vertically adjustable supports, enabling precise alignment with the mold outlet. The machine comprises an independent full-vacuum system and a spray‑cooling section, offering rapid cooling and excellent shaping performance.

Use and Maintenance

Before use, check that the nozzle is not clogged, and thoroughly clean any foreign matter from the platform as well as the filter mesh inside the bypass-type filter.

Adjust the mechanism and apply grease to the threaded parts and bearings.

Water must not be allowed to splash onto electrical components.

If the equipment is shut down during weather conditions that may cause freezing, all water must be drained from the water tank, the pump, and the vacuum pump to prevent the pump and piping from cracking due to frost.

Inspect the track for foreign objects and verify that no personnel or other unrelated items are present within the work zone.

Ensure that all preparatory work has been completed before powering on and conducting a test run, and adjust the speed and tension as needed.